Konstantin PKV
07.12.2014, 10:13
Продам Сабуферы ElectroVoice MTL-1 - 2 шт мощьность 800 ватт RMS номинал, 1600 ваттт музыкальной. Цена указана за 1 ед,
Specifications
Typical Axial Frequency Response,
(swept sine wave, 4 volts at 10 feet,
anechoic environment, normalized
for 1 watt, 1 meter into woofer); see
Figure 1;
50-160 Hz
Low-Frequency 3-dB-Down Point:
50 Hz
Usable Low-Frequency Limit (10-dB-
down point):
45 Hz
Half-Space Reference Efficiency:
6.1%
Long-Term Average Power-Handling
Capacity per EIA RS-426-A 1980
(see Power-Handling Capacity
section):
800 watts
Sensitivity (SPL at 1 watt, 1 meter
input, anechoic environment, swept
sine wave):
100 dB
Dispersion Angle Included by 6-dB-
Down Points on Polar Responses:
Essentially omnidirectional
Distortion, 0.1 Full Power Input into
Mid/Bass, (see Figure 2)
Second Harmonic, 100 Hz:
0.3%
Third Harmonic, 100 Hz:
0.4%
Transducer Complement:
Two DL18MT's
Box Tuning Frequency:
38 Hz
Recommended Crossover Frequency:
160 Hz
Crossover Slopes, suggested:
24 dB per octave
Impedance,
Nominal:
4 ohms
Minimum:
3 ohms
Input Connections:
Two paralleled Neutrik Speakon®
connectors
Supplied Accessory:
Neutrik Speakon® NL4FC input cable
connector
Suspension (see Suspending MTL-1
Enclosures section):
HS7 independently certified hanging
kits available
Materials,
Enclosure:
Black, carpet-covered 3/4-in. void-
free plywood
Grille:
Black, heavy-duty perforated metal
Enclosure Dimensions (see Figure 3),
Height:
1.16 m (45.8 in.)
Width:
572 mm (22.5 in.)
Depth:
758 mm (29.9 in.)
:ok::ok::ok:
Specifications
Typical Axial Frequency Response,
(swept sine wave, 4 volts at 10 feet,
anechoic environment, normalized
for 1 watt, 1 meter into woofer); see
Figure 1;
50-160 Hz
Low-Frequency 3-dB-Down Point:
50 Hz
Usable Low-Frequency Limit (10-dB-
down point):
45 Hz
Half-Space Reference Efficiency:
6.1%
Long-Term Average Power-Handling
Capacity per EIA RS-426-A 1980
(see Power-Handling Capacity
section):
800 watts
Sensitivity (SPL at 1 watt, 1 meter
input, anechoic environment, swept
sine wave):
100 dB
Dispersion Angle Included by 6-dB-
Down Points on Polar Responses:
Essentially omnidirectional
Distortion, 0.1 Full Power Input into
Mid/Bass, (see Figure 2)
Second Harmonic, 100 Hz:
0.3%
Third Harmonic, 100 Hz:
0.4%
Transducer Complement:
Two DL18MT's
Box Tuning Frequency:
38 Hz
Recommended Crossover Frequency:
160 Hz
Crossover Slopes, suggested:
24 dB per octave
Impedance,
Nominal:
4 ohms
Minimum:
3 ohms
Input Connections:
Two paralleled Neutrik Speakon®
connectors
Supplied Accessory:
Neutrik Speakon® NL4FC input cable
connector
Suspension (see Suspending MTL-1
Enclosures section):
HS7 independently certified hanging
kits available
Materials,
Enclosure:
Black, carpet-covered 3/4-in. void-
free plywood
Grille:
Black, heavy-duty perforated metal
Enclosure Dimensions (see Figure 3),
Height:
1.16 m (45.8 in.)
Width:
572 mm (22.5 in.)
Depth:
758 mm (29.9 in.)
:ok::ok::ok: