[Михаил 123]

SPECIFICATIONS

EUROPOWER EPX4000 Power Amp

Output Power
-RMS Power
Stereo Mode (both channels driven)
8Ohm per channel, stereo 530W
4Ohm per channel, stereo 870W
2Ohm per channel, stereo 1,440W
Bridged Mono
8Ohm / 1 kHz @ 0.1% THD 1,800W
4Ohm / 1 kHz @ 1% THD 3,000W
Peak Power
Stereo Mode (both channels driven)
8Ohm per channel, stereo 670W
4Ohm per channel, stereo 1,220W
2Ohm per channel, stereo 2,080W
Bridged Mono
8Ohm bridge mode 2,450W
4Ohm bridge mode 4,000W
Input Sensitivity: 1 V
Distortion <0.01%
Frequency Response 20 Hz - 20 kHz, +0/-1 dB
Voltage Gain 35 dB
Damping Factor > 300 @ 8Ohm
Input impedance 10 kOhm unbalanced, 20 kOhm balanced
Signal-to-Noise > 100 dBA
Controls
Front POWER switch GAIN control (channel 1 and 2)
Rear MODE switch X-over Switch, BRIDGE MODE switch
Indicators
POWER: Blue LEDs
CLIP (per channel): Blue LEDs
PROT (per channel): Blue LEDs
SIGNAL (per channel): White LEDs -20dB~-10dB
SIGNAL (per channel): White LEDs -10dB~ 0dB
Connectors
Inputs: Balanced XLR, 1/4" TRS , RCA
Outputs: Speakon and “touch-proof’’ binding posts
Circuit protection: Cooling Continuously variable speed fan, back to front airflow
Amplifier protection Full short circuit, open circuit, thermal,
ultrasonic, RF protection. Stable into reactive or mismatched loads
Output circuit type: Class H
Power supply / Voltage (Fuses)
USA / Canada: 120 V~, 60 Hz (T 30 A H 250 V)
UK / Australia: 240 V~, 50 Hz (T 15A H 250 V)
Europe: 230 V~, 50 Hz (T 15 A H 250 V)
Japan: 100 V~, 50-60 Hz (T 30 A H 250 V)
Power consumption: 4500W
Mains connector: Standard IEC receptacle
Dimensions (H x W x D) 3.46 x 19.01 x 14.68"
88 x 483 x 373 mm
Weight 22.26 lb. / 10.10 kg

Добавлено через 3 минуты
Обратите внимание, что в мосту на 4Ohm / 1 kHz @ 1% THD 3,000W, на 8Ohm / 1 kHz @ 0.1% THD 1,800W, так что мостом на 4 Ом только на сабы.....