reset rolan korg memory setting - Форум сайта plus-msk.ru

Romastudio · 15.08.2011, 08:13

Всем привет , сегодня очень часто задают вопрос как мне сделать фабричные настройки на ситезаторе, предлагаю всем таблицу для roland - korg

reset roland

ROLAND A-220 HOLD B AND MEMORY THEN POWER ON.
ROLAND A-30 HOLD WRITE WHILE POWERING ON (30 SECONDS)
ROLAND A-33 HOLD WRITE WHILE POWERING ON (30 SECONDS)
ROLAND A-37 HOLD WRITE BUTTON AND POWER ON. DISPLAY SHOWS FACTORY SETUP AT COMPLETION.
ROLAND A-50 HOLD 1ST+3RD+4TH BUTTONS UNDER DISPLAY, PRESS CHANNEL, THEN PRESS ANY CURSOR KEY.
ROLAND A-80 HOLD 1ST+3RD+4TH BUTTONS UNDER DISPLAY, PRESS CHANNEL, THEN PRESS ANY CURSOR KEY.
ROLAND A-880 HOLD SIGNAL AND MEMORY THEN POWER ON.
ROLAND A-90 HOLD EDIT, POWER ON THEN PRESS ENTER. WITH VOICE EXPANDER BOARD: HOLD MANUAL, POWER ON, THEN PRESS ENTER.
ROLAND A90EX HOLD MANUAL BUTTON AND POWER ON. THEN PRESS ENTER.
ROLAND ADA-8024 no rom reset.
ROLAND ALPHA JUNO-1 no rom reset.
ROLAND ALPHA JUNO-2 no rom reset.
ROLAND AP-700 PWR ON, EXIT REPEATEDLY TO ANALYZER/FILTER SCREEN. CURSOR TO: MENU + ENTER, SYSTEM + ENTER, INIT + ENTER. USE VALUE SELECT ALL THEN EXEC + ENTER TWICE.
ROLAND AR SERIES no rom reset.
ROLAND AT SERIES HOLD ONE TOUCH PROGRAM + POWER ON.
ROLAND AX-1 HOLD WRITE BUTTON + POWER ON (HOLD 30 SECONDS).
ROLAND AXIS-1 POWER ON. HOLD FUNCTION; PRESS F#0, C#2, AND D#2 KEYS.
ROLAND CA-30 RESETS EVERY TIME TOGGLED OF AND THEN ON.
ROLAND CDX1 PRESS UTILITY. CURSOR RIGHT, SELECT INIT AND PRESS ENTER THEN CURSOR TO GLOBAL. PRESS ENTER THREE TIMES.
ROLAND CR ( ALL OTHER) no rom reset.
ROLAND CR-80 DEL + REPEAT + POWER ON, THEN PRESS ENTER.
ROLAND CSQ SERIES no rom reset.
ROLAND D-10 HOLD TUNE/FUNCTION AND WRITE WHILE POWERING ON.
ROLAND D-110 no rom reset.
ROLAND D-20 HOLD TUNE/FUNCTION AND WRITE WHILE POWERING ON.
ROLAND D-5 no rom reset.
ROLAND D-50 TUNE/FUNCTION AND MIDI DATA INIT: HOLD 0 AND DATA TRANSFER, POWER ON. PATCH + REVERB MUST BE LOADED FROM CARD OR SYSEX FILE.
ROLAND D-550 TUNE/FUNCTION AND MIDI DATA INIT: HOLD PATCH BANK 2, PATCH NUMBER6, AND ENTER, POWER ON. PATCH AND REVERD DATA MUST BE LOADED FROM CARD OR SYSEX FILE.
ROLAND D-70 HOLD BANK 8 WHILE POWERING ON. PRESS ENTER, THENPRESS WRITE TWICE.
ROLAND D2 HOLD WRITE + PRESS SYSTEM. PRESS ENTER TWICE.
ROLAND DDR-30 HOLD #1 BUTTON AND POWER ON.
ROLAND DEP-3 MEMORY NO UP AND DOWN BUTTONS WHILE POWERING ON.
ROLAND DEP-5 MEMORY NO UP AND DOWN BUTTONS WHILE POWERING ON.
ROLAND DJ-70 no rom reset.
ROLAND DJ-70MKII no rom reset.
ROLAND DM SERIES no rom reset.
ROLAND DR-202 HOLD MUTE + ROLL AND POWER ON. VALUE DIAL TO SELECT 'ALL', THEN PRESS TAP/ENTER TWICE.
ROLAND DR-5 FRET LEFT + FRET RIGHT + POWER ON; 2 X ENTER.
ROLAND DR-550 HOLD -1 AND +1 AND POWER ON, THEN PRESS START.
ROLAND DR-550MKII HOLD -1 AND +1 AND POWER ON, THEN PRESS START.
ROLAND DR-660 UTILITY THEN CURSOR TO SELECT (8) INIT; 2 X ENTER.
ROLAND DR-670 HOLD RECORD + STOP/CONT BUTTONS AND POWER ON. PRESS ENTER TWICE.
ROLAND DR-770 PRESS UTILITY AND THEN CURSOR RT TO 9.F.RST. VALUE DIAL TO SELECT ALL, AND THEN PRESS ENTER TWICE.
ROLAND DS-330 HOLD REVERB + SPLIT AND POWER ON; PRESS YES.
ROLAND E-10 HOLD WRITE WHILE TURNING POWER ON.
ROLAND E-12 no rom reset.
ROLAND E-14US resets at power on.
ROLAND E-15 resets at power on.
ROLAND E-16 resets at power on.
ROLAND E-20 HOLD WRITE + POWER ON.
ROLAND E-28US resets at power on.
ROLAND E-30 HOLD WRITE + POWER ON.
ROLAND E-35 HOLD REC/PUNCH IN + POWER ON.
ROLAND E-36 RECORDER + POWER ON.
ROLAND E-5 no rom reset.
ROLAND E-56 HOLD WRITE + POWER ON.
ROLAND E-66 RECORD (IN DISK RECORDER SECTION) + POWER ON.
ROLAND E-68US HOLD WRITE + POWER ON.
ROLAND E-70 HOLD WRITE + POWER ON.
ROLAND E-86 HOLD WRITE + POWER ON.
ROLAND E-96 HOLD WRITE + POWER ON.
ROLAND E300 PRESS UTILITY. USE BUTTONS BELOW 'PAGE' TO SELECT FACTORY PRESET. PRESS EXECUTE, THEN OK. WHEN RESET COMPLETE POWER OFF, THEN ON.
ROLAND E500 PRESS UTILITY. USE BUTTONS BELOW 'PAGE' TO SELECT FACTORY PRESET. PRESS EXECUTE, THEN OK. WHEN RESET COMPLETE POWER OFF, THEN ON.
ROLAND E600 PRESS UTILITY. USE PAGE BUTTONS TO SELECT FACTORY PRESET, THEN EXECUTE.
ROLAND EF303 HOLD SHIFT AND THEN POWER ON. PRESS WRITE TWICE,THEN POWER OFF AN ON AGAIN.
ROLAND EM-10 HOLD WRITE AND POWER ON.
ROLAND EM-101 no rom reset.
ROLAND EM-15 HOLD THE WRITE BUTTON WHILE TURNING ON THE POWER.
ROLAND EM-20 HOLD WRITE AND POWER ON.
ROLAND EM-25 HOLD THE WRITE BUTTON WHILE TURNING ON THE POWER.
ROLAND EM-30 HOLD WRITE AND POWER ON.
ROLAND EM-303 resets at power on.
ROLAND EM-305 resets at power on.
ROLAND EM-50 HOLD WRITE AND POWER ON.
ROLAND EP (ALL OTHER) no rom reset.
ROLAND EP-3 resets at power on.
ROLAND EP-5 HOLD REC + PLAY, PRESS STRINGS, POWER OFF / ON.
ROLAND EP-7 HOLD REC + PLAY, PRESS STRINGS, POWER OFF / ON.
ROLAND EP-707 resets at power on.
ROLAND EP-75 HOLD REC AND POWER ON.
ROLAND EP-7MKII HOLD REC + PLAY, PRESS STRINGS, POWER OFF AND ON.
ROLAND EP-85 HOLD REC AND POWER ON.
ROLAND EP-9 HOLD REC + PLAY, PRESS CHOIR, POWER OFF AND ON.
ROLAND EP-95 HOLD REC BUTTON WHILE POWERING ON.
ROLAND FA76 PRESS MENU THEN UP/DOWN TO FACTORY PRESET. PRESSF8 TWICE ( SELECT THEN EXECUTE ) TO RESET.
ROLAND FANTOM PRESS MENU THEN UP/DOWN TO FACTORY PRESET. PRESSF8 TWICE ( SELECT THEN EXECUTE ) TO RESET.
ROLAND FC-100 no rom reset.
ROLAND FC-100MKII HOLD #1 + #2 + #8 AND POWER ON.
ROLAND FC-200 HOLD #10 AND POWER ON, THEN PRESS CTL PEDAL.
ROLAND FG-10 HOLD CLEAR AND EXIT THEN POWER ON.
ROLAND FG-1000 HOLD CLEAR AND EXIT THEN POWER ON.
ROLAND FP-1 resets at power on.
ROLAND FP-8 PRESS FUNC AND RELEASE HOLD PIANO PRESS FUNC AGAIN.
ROLAND FP-9 resets at power on.
ROLAND G-600 HOLD WRITE AND POWER ON.
ROLAND G-800 HOLD WRITE, THEN POWER ON.
ROLAND GC-8 no rom reset.
ROLAND GI-10 HOLD PARAMETER + AND -, POWER ON THEN PRESS VALUE +.
ROLAND GM-70 POLY MODE: HOLD PLAY, GENERAL EDIT, + IND EDIT THEN POWER ON. MONO MODE: HOLD TUNE, CONTROL ASSIGN, AND DATA TRANSFER THEN POWER ON.
ROLAND GP-100 HOLD IN PARAMETER KNOB, POWER ON, PRESS WRITE.
ROLAND GP-16 HOLD #6, #7, #8, THEN POWER ON. USE FUNCTION LEFT AND RUGHT TO SELECT "2. ALL FACTORY PRESET"THEN PRESS WRITE 3 TIMES.
ROLAND GP-8 no rom reset.
ROLAND GR (ALL OTHER) no rom reset.
ROLAND GR-09 HOLD PEDAL #2 THEN POWER ON. PRESS VALUE+ THEN PRESS EDIT/PLAY.
ROLAND GR-1 HOLD WRITE/COPY THEN POWER ON THEN PRESS YES.
ROLAND GR-30 HOLD PEDAL #2, POWER ON. PRESS PATCH + TO SELECT INIT. PRESS EDIT/PLAY, THEN PATCH + AND - SIMULTANEOUSLY.
ROLAND GR-33 PRESS SYSTEM THEN PARAMETER, USE VALUE DIAL TO SELECT ALL. PRESS WRITE TWICE.
ROLAND GR-50 no rom reset.
ROLAND GS-6 no rom reset.
ROLAND GT-3 HOLD MOD AND SFX AND POWER ON. PRESS WRITE.
ROLAND GT-5 HOLD MOD + FEED BACKER/SLOW GEAR, POWER ON. THEN PRESS WRITE.
ROLAND GX-700 PRESS TUNER/UTILITY. USE PARAMETER LEFT AND RIGHT TO SELECT FACT INIT. CURSOR TO LEFT, DIAL SYSTEM, THEN RIGHT AND DIAL P#100. PRESS WRITE THEN TUNER/UTILITY.
ROLAND HP (ALL OTHER) resets at power on.
ROLAND HP-100 no rom reset.
ROLAND HP-300 no rom reset.
ROLAND HP-400 no rom reset.
ROLAND HS SERIES no rom reset.
ROLAND JD-800 PRESS DATA TRANSFER. PAGE UP TO SELECT FACTORY PRESET, PRESS YES.
ROLAND JD-990 HOLD EXIT AND PRESS UTILITY. PRESS F6 THEN F5.
ROLAND JP-6 no rom reset.
ROLAND JP-8 no rom reset.
ROLAND JP-8000 HOLD SHIFT, PRESS INIT/BULK. PRESS BUTTON 7, USE UP/DOWN (SELECT FACTORY RESET), PRESS WRITE TO SELECT FACTORY PRESETS.
ROLAND JS-30 HOLD RECORD BUTTON (SEQUENCER SECTION), POWER ON.
ROLAND JUN0-106 no rom reset.
ROLAND JUN0-60 no rom reset.
ROLAND JUNO-1 no rom reset.
ROLAND JUNO-2 no rom reset.
ROLAND JUNO-6 no rom reset.
ROLAND JUPITER-6 no rom reset.
ROLAND JUPITER-8 no rom reset.
ROLAND JV-1000 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE.
ROLAND JV-1080 PRESS UTILITY. CURSOR DOWN ONCE THEN RIGHT 3 TIMES TO FACTORY PRESET. PRESS ENTER TWICE, THEN UTILITY.
ROLAND JV-2080 PRESS UTILITY. PRESS F6 TWICE TO MENU 3. PRESS F1 THEN F6. IF REQ'D USE VALUE DIAL TO TURN OFF MEM. PROT. AND PRESS F6 TWICE.
ROLAND JV-30 PRESS CHORUS + REVERB (ABOVE INIT) TOGETHER THEN PRESS VALUE UP.
ROLAND JV-35 PRESS CONTROL + MASTER TOGETHER. USE PARAMETER UP AND DOWN TO SELECT ALL. PRESS VALUE UP.
ROLAND JV-50 PRESS CONTROL + MASTER TOGETHER. USE PARAMETER UP AND DOWN TO SELECT ALL. PRESS VALUE UP.
ROLAND JV-80 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE.
ROLAND JV-880 PRESS UTILITY, USE DATA DIAL TO SELECT FACTORY PRESET. PRESS ENTER TWICE.
ROLAND JV-90 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE.
ROLAND JW-50 PRESS TUNE/FUNCTION. PRESS F5 THEN F4 THEN F3 THEN F4.
ROLAND JX-1 HOLD WRITE AND FLUTE THEN POWER ON.
ROLAND JX-10 no rom reset.
ROLAND JX-3P no rom reset.
ROLAND JX-8P no rom reset.
ROLAND KR-100 resets at power on.
ROLAND KR-3000 HOLD FROM AND TO BUTTONS, THEN PRESS WRITE.
ROLAND KR-33 resets at power on.
ROLAND KR-350 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR-3500 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR-370 resets at power on.
ROLAND KR-4500 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR-4700 HOLD LOAD AND EDIT, THEN PRESS SAVE.
ROLAND KR-500 HOLD FROM AND TO, THEN PRESS WRITE.
ROLAND KR-5000 HOLD LOAD AND EDIT, THEN PRESS SAVE.
ROLAND KR-55 HOLD MIDI FUNCTION AND PRESS CARDS (5 SECONDS).
ROLAND KR-5500 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR-575 PRESS FUNCTION; PAGE TO 'FACTORY RESET'. TOUCH EXECUTE, THEN OK.
ROLAND KR-577 PRESS UTILITY; USE BUTTONS BELOW PAGE TO SELECT 'FACTORY PRESET'. PRESS EXECUTE, THEN OK.
ROLAND KR-650 HOLD LOAD AND SAVE, THEN PRESS WRITE.
ROLAND KR-770 HOLD PART VOLUME ACCOMP, PRESS TRACK 2 + 4 BUTTONS SIMULTANEOUSLY. USE PART VOLUME ACCOMP REPEATEDLY TO GET FACTORY SET-UP LOAD. WHEN DONE PWR OFF/ON.
ROLAND KR-977 PRESS FUNCTION; USE PAGE BUTTONS TO 'FACTORY RESET'. TOUCH EXECUTE, THEN OK.
ROLAND LVC-1N HOLD ENTER BUTTON THEN POWER ON.
ROLAND M-760 HOLD EDIT, PRESS WRITE. PARAMETER UP/DOWN TO SELECT ALL + PRESS WRITE. ON COMPLETION PRESS EDIT TO RETURN TO PLAY.
ROLAND M-DC1 HOLD F3 AND THEN POWER ON.
ROLAND M-GS64 HOLD F3 AND THEN POWER ON. CONTRIBUTED-: HOLD SELECT AND PRESS F4, PRESSF3 AND THEN PRESS ENTER.
ROLAND M-OC1 HOLD F3 AND THEN POWER ON.
ROLAND M-SE1 HOLD F3 AND THEN POWER ON.
ROLAND M-VS1 HOLD F3 AND THEN POWER ON.
ROLAND MBD1 HOLD F3 AND THEN POWER ON.
ROLAND MC-303 HOLD SHIFT AND THEN POWER ON, THEN PRESS ENTER.
ROLAND MC-307 PRESS SYSTEM, THEN F2 (UTIL). CURSOR DN TO FACTORY RESET. PRESS F1 AND THEN F4.
ROLAND MC-50 no rom reset.
ROLAND MC-505 HOLD SHIFT BUTTON AND POWER ON. PRESS ENTER.
ROLAND MC-50MKII no rom reset.
ROLAND MC-80 no rom reset.
ROLAND MC-80EX no rom reset.
ROLAND MDC-1 HOLD F3 AND POWER ON.
ROLAND ME-10 HOLD BANK DOWN PEDAL, THEN PRESS WRITE.
ROLAND ME-30 HOLD PARAMETER RIGHT AND VALUE WHILE POWERING ON. PRESS WRITE/COPY.
ROLAND ME-33 HOLD EZ TONE AND AMP/EFFECT RIGHT WHILE POWERING ON. THEN PRESS WRITE.
ROLAND ME-5 HOLD PEDALS 1 AND 2, POWER ON; PRESS WRITE IMMEDIATELY.
ROLAND ME-6 HOLD LEFT + DOWN AND POWER ON; THEN PRESS WRITE.
ROLAND ME-6B HOLD LEFT + DOWN AND POWER ON; THEN PRESS WRITE.
ROLAND ME-8 HOLD LEFT + DOWN AND POWER ON; PRESS WRITE/COPY.
ROLAND ME-8B HOLD PARAMETER LEFT + DOWN BUTTONS, THEN PRESS WRITE/COPY.
ROLAND ME-X HOLD PARAMETER LEFT + DOWN AND POWER ON, THEN PRESS WRITE.
ROLAND MGS-64 HOLD F3 AND POWER ON.
ROLAND MK-60 no rom reset.
ROLAND MK-80 HOLD WRITE, PRESS EDIT. HOLD LEFT AND RIGHT CURSOR BUTTONS AND PRESS UP.
ROLAND MKB SERIES no rom reset.
ROLAND MKS-50 POLY MODE: HOLD NUMBER BUTTONS 4 AND 8 AND POWER ON.
ROLAND MKS-50 MONO MODE: HOLD NUMBER BUTTONS 3 AND 7 AND POWER ON.
ROLAND MMP-2 PRESS SYSTEM UNTIL LIGHTS ORANGE. USE PAGE LEFT/RIGHT BUTTONS TO SELECT INITIALIZE. USE LEFT VALUE TO SELECT ALL; PRESS ENTER TWICE.
ROLAND MP SERIES no rom reset.
ROLAND MS-1 no rom reset.
ROLAND MSE-1 HOLD F3 AND POWER ON.
ROLAND MSQ-100 no rom reset.
ROLAND MSQ-700 no rom reset.
ROLAND MT-100 HOLD STOP, PRESS DELETE. AFTER THE DISPLAY FLASHES "ALL CLEAR" PRESS EXECUTE.
ROLAND MT-120 HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. PRESS FWD REPEATEDLY UNTIL READS T13. PRESS PLAY THEN RECORD, THEN POWER OFF/ON.
ROLAND MT-120S HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. PRESS FWD REPEATEDLY UNTIL READS T13. PRESS PLAY THEN RECORD, THEN POWER OFF/ON.
ROLAND MT-200 HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. USE DIAL TO SELECT T-15 ON DISPLAY. PRESS PLAY THEN RECORD, THEN POWER OFF/ON.
ROLAND MT-300 PRESS MENU, DIAL TO FACTORY PRESET. PRESS ENTER TWICE.
ROLAND MT-32 HOLD MASTER VOLUME, PRESS RHYTHM PART, PRESS PART 1.
ROLAND MT-80 resets at power on.
ROLAND MV-30 no rom reset.
ROLAND MVS-1 HOLD F3 AND POWER ON.
ROLAND OCTAPAD HOLD MIDI CH AND NOTE NUMBER, POWER ON. POWER OFF, THEN POWER ON AGAIN.
ROLAND OCTAPAD II HOLD BOTH VALUE BUTTONS, POWER ON.
ROLAND P-330 no rom reset.
ROLAND P-55 HOLD BOTH INSTRUMENT BUTTONS, POWER ON, THEN PRESS PARAM 1.
ROLAND PAD-8 HOLD MIDI CH AND NOTE NUMBER, POWER ON. POWER OFF, THEN POWER ON.
ROLAND PAD-80 HOLD BOTH VALUE BUTTONS, POWER ON.
ROLAND PC-150 HOLD COMMAND (LEFT), POWER ON.
ROLAND PC-200 HOLD THE 2 BUTTONS UNDER "STANDARD", POWER ON.
ROLAND PIANO PLUS (ALL) no rom reset.
ROLAND PK-5 HOLD OCT/PARAM AND POWER ON.
ROLAND PK-7 no rom reset.
ROLAND PLANET-P no rom reset.
ROLAND PLANET-S no rom reset.
ROLAND PM-16 no rom reset.
ROLAND PMA-5 HOLD VALUE, POWER ON. TOUCH 2 CAL. POINTS TOP RIGHT + BOTTOM LEFT OF DISPLAY W/ TOUCH PEN. DISPLAYS COMPLETED THEN INITIALIZE, TOUCH EXEC.
ROLAND PRO-E HOLD WRITE, POWER ON.
ROLAND R-5 HOLD PAGE + SELECT AND POWER ON. PRESS ENTER TWICE AT PROMPTS.
ROLAND R-70 HOLD MIDI + ASSIGN AND POWER ON. PRESS YES TWICE AT PROMPTS.
ROLAND R-8 HOLD CURSOR PAGE AND PARAM SELECT THEN POWER ON.PRESS ENTER TWICE.
ROLAND R-880 no rom reset.
ROLAND R-8M HOLD CURSOR RIGHT AND ENTER, POWER ON. PRESS ENTER TWICE AT PROMPTS.
ROLAND RA-50 HOLD WRITE THEN POWER ON.
ROLAND RA-90 HOLD WRITE THEN POWER ON.
ROLAND RA-95 HOLD REC, POWER ON.
ROLAND RD-150 HOLD THE PLAY AND REC BUTTONS WHILE POWERING ON.
ROLAND RSP-550 POWER ON WHILE HOLDING PROG PAGE UP AND DOWN, THEN PRESS WRITE.
ROLAND SB-55 POWER ON WHILE HOLDING CLEAR BUTTON.
ROLAND SC-155 POWER IN STANDBY MODE. HOLD BOTH INSTRUMENT BUTTONS, PRESS POWER ON AND THEN PRESS ALL.
ROLAND SC-33 HOLD SPLIT AND REVERB WHILE POWERING ON, THEN PRESS YES.
ROLAND SC-50 HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SC-55 HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SC-55MKII HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL.
ROLAND SDD-320 no rom reset.
ROLAND SH-101 no rom reset.
ROLAND SH-2000 no rom reset.
ROLAND SN700 no rom reset.
ROLAND SP700 no rom reset.
ROLAND SPD-11 HOLD ALL/ENTER WHILE POWERING ON. PRESS ALL/ENTER AGAIN.
ROLAND SPD-8 HOLD EDIT BUTTON WHILE POWERING ON.
ROLAND SRV-1000 no rom reset.
ROLAND TB-303 no rom reset.
ROLAND TD-10 HOLD SETUP AND EXIT KEYS AND TURN POWER ON, THENPRESS F4.
ROLAND TD-7 PRESS SYSTEM. CURSOR TO 'INT' AND PRESS ENTER. CURSOR TO 'HIHAT' THEN DATA DIAL TO SELECT 'ALL'. PRESS ENTER TWICE.
ROLAND TD-8 V CUSTOM PRESS SETUP THEN [F3 (MENU)]. PRESS INC/+, ROTATE THE VALUE DIAL, OR PRESS CURSOR TO MOVE THE CURSOR TO "RESET".
ROLAND TR-505 HOLD PATTERN GROUP A AND MODE AND POWER ON.
ROLAND TR-626 HOLD TRACK #1 AND MODE AND POWER ON.
ROLAND TR-707 HOLD TRACK WRITE AND PATTERN 1 AND POWER ON.
ROLAND TR-727 HOLD TRACK WRITE AND PATTERN 1 AND POWER ON.
ROLAND TR-808 no rom reset.
ROLAND TR-909 HOLD TRACK #1 AND PATTERN #1 AND POWER ON.
ROLAND U-110 HOLD THE EDIT AND PART BUTTONS AND POWER ON.
ROLAND U-20 no rom reset.
ROLAND U-220 no rom reset.
ROLAND VP-70 HOLD MIDI, PLAY, AND VOICE EXP AND POWER ON.
ROLAND VS-1680 no rom reset.
ROLAND VS-1680EX no rom reset.
ROLAND VS-1824 no rom reset.
ROLAND VS-1824CD no rom reset.
ROLAND VS-1880 no rom reset.
ROLAND VS-2480 no rom reset.
ROLAND VS-2480CD no rom reset.
ROLAND VS-840 no rom reset.
ROLAND VS-840EX no rom reset.
ROLAND VS-840GX no rom reset.
ROLAND VS-880 no rom reset.
ROLAND VS-880EX no rom reset.
ROLAND VS-890 no rom reset.
ROLAND VT-1 HOLD PRESET/USER BUTTON AND POWER ON.
ROLAND W-30 no rom reset.
ROLAND W-50 PRESS CONTROL AND MASTER BUTTONS SIMULTANEOUSLY.USE PARAMETER UP AND DOWN BUTTONS TO SELECT ALL. PRESS VALUE UP BUTTON.
ROLAND XP-50 PRESS DISK UTIL, SELECT SOUND, THEN PROTECT, SETMEM PROTECT OFF. EXIT, SELECT PRESET AND PRESS ENTER. (REMEMBER TO SET MEM PROTECT BACK ON ).
ROLAND XV-5050 PRESS UTILITY AND CURSOR LEFT BUTTONS. VALUE DIAL TO SELECT FACTORY RESET AND PRESS ENTER TWICE.
ROLAND XV-5080 PRESS SYSTEM/UTILITY SO LIGHT BLINKING. PRESS F6 AND THEN F5. PRESS F6 (EXECUTE) AGAIN.
ROLAND XV-88 PRESS UTILITY, CURSOR DOWN TO UTIL PAGE 2. PRESS4 (BASS), PRESS ENTER TWICE.

Romastudio · 15.08.2011, 08:14

How to Reset your KORG Keyboard or Processor
01/W Series Initialization: Hold Reset and Compare while turning it on. Preload: Global screen 7 Press G then E ROM Check: Hold Reset while turning it on.
03R/W Initialization: Hold Edit and 1 while turning it on. Preload: Global screen 5D, then select “OK”. ROM Check: Hold +1 and -1 while turning it on.
05R/W Initialization: Hold Edit and 1 while turning it on. Preload: Global Screen 5A, then select “OK”. ROM Check: Hold Edit and Global/Multi while turning it on.
168RC Initialization: Hold leftmost Knob under screen and Up and Down while turning it on. Preload: Factory data must be transmitted and returned via SysEx dump. ROM Check: Given on power up.
A1 Initialization: Hold Write and –1 while turning it on. Preload: Card Load (SPC0A1) ROM Check: Hold Write while turning it on.
A2/A3 Initialization: Hold Chain/Effect and B while turning it on. Preload: Hold Up and Down arrows while turning it on. Press ROM Check: Hold Utility, Up and A while turning the unit on. Press F. Set M/R to M/S and D/R to D/S. Hold Utility and F.
A4 Initialization: Battery Removal Preload: Hold Bank Up and Write while turning it on. PL appears, press write again. ROM Check: N/A
A5 Initialization: Battery Removal Preload: Hold Mode Footswitch and Write while turning it on. Press Footswtich 1, F is dispayed on screen. ROM Check: N/A
AX1000G Initialization: Battery Removal Preload: Hold Bank footswitch and Exit button while turning it on. Press Write button to load the factory programs.
ROM Check: N/A
AX100G Initialization: Battery Removal Preload: Hold FX Select EXIT button while turning it on. Press write button.
ROM Check: N/A
AX1500G Initialization: Battery Removal Preload: 1. Hold down Bank footswitch EXIT button while turning it on. Then press Write button.

ROM Check: N/A
AX1G/B Initialization: Battery Removal Preload: Hold down the left arrow key and the "+ while powering on. Then press the "+" button again. ROM Check: N/A
AX300G/B Initialization: Battery Removal Preload: Hold Param/Value and Compare/Write while turning it on. Then Compare/Write once again. ROM Check: N/A
C-Series Initialization: Hold MIDI/Transpose and Split buttons while turning it on. Preload: Disk Load C900 (CFD01P) Ci86/9600 (CID00PE ) ROM Check: N/A
CX-3 Initialization: Hold Program 2 and 7 while turning it on. Preload: Hold Program 2 and 7 while turning it on. ROM Check: N/A
D Series Initialization: System, Disk Utility, Initialize Execute Preload: Backup CDs ROM Check: Given on power up.
G3 Initialization: Battery Removal Preload: Hold Bank and Write while turning it on. Release both and then press Write again. ROM Check: N/A
i1/i2/i3 Initialization: Hold Edit/Style and Arrange/Play while turning it on. Preload: Disk Load (IFD01P for i3 and i2, IFD02P for i1) ROM Check: Hold Enter and 7 while turning it on.
I30 Initialization: Hold Arr.Play and Global while turning it on. Preload: Disk Load (I30FD00P) ROM Check: Given on power up.
i5S/M Initialization: Hold Arr.Play and Global while turning it on. Preload: Disk Load (IFD00P) ROM Check: Hold Global while turning it on.
iS35/40/50/B i40M Initialization: Hold Arr.Play and Global while turning it on. Preload: Disk Load (IFDD1006 except for iS40 and i40M which is FDD1007) ROM Check: Hold Disk/Global while turning it on.
iX300 Initialization: Hold Arr.Play and Global while turning it on. Preload: Disk Load (IXD00P) ROM Check: Hold Disk/Global while turning it on.
KAOSS Pad Initialization: Hold 3, FX and HOLD buttons while turning it on. L appears in screen. Then press 1,3,5,1,3,5. Preload: N/A ROM Check: N/A
KARMA Initialization: Hold Enter and 0 while turning it on Preload: Disk Load (KMFD00P) ROM Check: Given on power up.
M1 Initialization: Hold Int, Card and Combi while turning it on. Preload: Card Load (MPC00P) ROM Check: Hold INT while turning it on.
M1R/M1REX Initialization: Hold Int, Combi and Prog while turning it on. Preload: Card Load (MPC00P, MPC0EX for EX model) ROM Check: Hold INT while turning it on.
M3R Initialization: Hold Edit and No while turning it on. Preload: Global screen 5D “OK”, then select "O.K." ROM Check: Hold Edit and Global while turning it on.
MS2000/2000R Initialization: Hold Mod Sequencer On/Off and 3 while turning it on. Preload: Global screen 2D, then select "OK". ROM Check: Hold Mod Sequencer On/Off and 5 while turning it on.
N1/N5/EX Initialization: Test Mode - Hold Enter and 7 while turning it on, then Page> to skip to "Ready to Boot", press Enter. Preload: Press Utility, select "Factory Reset" then press Enter. ROM Check: Hold 10s hold and Enter while turning it on.
N1R Initialization: Test Mode - Hold Global and Dec- while turning it on, Page> skips to "Ready to Boot", press Enter. Preload: Press Global, Page > to Init. Select "Factory Preload" then press Enter. ROM Check: Hold Edit/Enter and Global while turning it on.
N364/N264 Initialization: Hold Enter and 7 while turning it on. Preload: Disk Load (NSD3) ROM Check: Hold Enter and 7 while turning it on.
NX/NS5R Initialization: Hold Param. > and < while turning it on. Preload: Enter button, then select Utility, Preset, Factory Preset, Yes. ROM Check: Hold Param < and> while turning it on.
PA80/60 Initialization: N/A Preload: Disk Load (6 Disk set available from korgpa.com) ROM Check: Given on power up.
Prophecy Initialization: Battery Removal Preload: Global screen 19, press Enter. ROM Check: Hold Enter and Exit while turning it on.
PX1 Initialization: Battery Removal Preload: Metronome and Enter buttons while powering on. Then press the "+" button. ROM Check: N/A
PX2 Initialization: Battery Removal Preload: Rhythm and Enter buttons while powering on. Then press the "+" button. ROM Check: N/A
PX3/PX3B Initialization: Battery Removal Preload: PX3: Rhythm/Aux and "+" button while powering on. Then press the Bypass/Tune button. PX3B: HBB and "+" button while powering on. Then press Bypass/Tune. ROM Check: N/A
PX4/PX4B Initialization: Battery Removal Preload: PX4: Rhythm and UP arrow buttons while powering on. Then press Enter/Rec. PX4B: Rhythm and Up arrow buttons while powering up. Then press press Enter/Rec. ROM Check: N/A
S3 Initialization: Hold Stop and S1 while turning it on. Preload: Hold Stop and S1 while turning it on. ROM Check: Hold Stop and S4 while turning it on.
SG Rack Initialization: Edit and Yes while turning it on. Preload: Global screen 7, then select "O.K". ROM Check: Hold Edit and FX On/Off while turning it on.
SGPROX Initialization: Hold Program and Piano 8 while turning it on. Preload: Program Edit mode screen 14 (Each program!) ROM Check: Hold Program and Piano 7 while turning it on.
SP500 Initialization: Hold Function and Mixer while turning it on. Preload: Function screen 7. ROM Check: Hold Function and Mixer while turning it on.
T Series Initialization: Hold Fine and Prog A while turning it on. Preload: Disk Load (TSD00PII) ROM Check: Hold Fine and Program A while turning it on (Will initialize… back up!)
Trinity Series Initialization: Hold Enter and 0 while turning it on Preload: Disk Load (TFD00P and TFD01P) ROM Check: Given on power up.
Triton Classic/ST Initialization: Hold Enter and 0 while turning it on Preload: Disk Load (TNFD00P and TNFD01P for Classic, Hard Drive contains preload for Studio) ROM Check: Given on power up.
Triton LE Initialization: Hold Enter and 0 while turning it on Preload: Global mode, F8, Select "Preload" ROM Check: Given on power up.
Triton Rack Initialization: Hold Enter and 0 while turning it on Preload: Disk Load (TNRFD00P and TNRFD01P) ROM Check: Given on power up.
TRR Initialization: Hold A4 and Edit while turning it on. Preload: Global screen 10, then select "OK". ROM Check: Hold Enter and Yes while turning it on.
WS/WSEX/AD Initialization: Power on, wait for "Wavestation" to flash then Cursor down and 4. Enter Init screen from there. Preload: Card Load (WPC00PI, II and III) ROM Check: Power on, wait for "Wavestation" to flash then Cursor down and 4.
WSSR Initialization: Hold Down Cursor, Bank, Edit and Yes while on. Enter Init screen from there. Preload: Card Load (WPC00PI, II and III) ROM Check: Hold Down Cursor, Bank Edit and Yes while on.
X2/X3/X3R Initialization: Hold Page Down and 0 while turning it on Preload: Disk Load (XSD00P) ROM Check: Hold Enter and 7 while turning it on.
X5/X5D/DR Initialization: Hold Page + and Page - while turning it on. Preload: Global Screen 5A, then select “OK”. ROM Check: Hold Edit and Global/Multi while turning it on.
Z1/Z1EX Initialization: Hold down SW1 and SW2 while turning it on. Preload: Preload screen in global mode. ROM Check: Hold Exit and Enter while turning it on.

Rostyk · 15.08.2011, 17:01

Вот более полное "собрание сочинений" (Alesis, ART, BOSS, DIGITECH, Ensoniq, Korg, Kurzweil, OBERHEIM, Peavey, Roland, Yamaha, ZOOM):
[Ссылки могут видеть только зарегистрированные пользователи. ]

15.08.2011, 08:13	#1
Romastudio Пользователь Регистрация: 14.10.2010 Сообщений: 49 Поблагодарили: 14 Вес репутации: 0 Репутация: 10	reset rolan korg memory setting Всем привет , сегодня очень часто задают вопрос как мне сделать фабричные настройки на ситезаторе, предлагаю всем таблицу для roland - korg reset roland ROLAND A-220 HOLD B AND MEMORY THEN POWER ON. ROLAND A-30 HOLD WRITE WHILE POWERING ON (30 SECONDS) ROLAND A-33 HOLD WRITE WHILE POWERING ON (30 SECONDS) ROLAND A-37 HOLD WRITE BUTTON AND POWER ON. DISPLAY SHOWS FACTORY SETUP AT COMPLETION. ROLAND A-50 HOLD 1ST+3RD+4TH BUTTONS UNDER DISPLAY, PRESS CHANNEL, THEN PRESS ANY CURSOR KEY. ROLAND A-80 HOLD 1ST+3RD+4TH BUTTONS UNDER DISPLAY, PRESS CHANNEL, THEN PRESS ANY CURSOR KEY. ROLAND A-880 HOLD SIGNAL AND MEMORY THEN POWER ON. ROLAND A-90 HOLD EDIT, POWER ON THEN PRESS ENTER. WITH VOICE EXPANDER BOARD: HOLD MANUAL, POWER ON, THEN PRESS ENTER. ROLAND A90EX HOLD MANUAL BUTTON AND POWER ON. THEN PRESS ENTER. ROLAND ADA-8024 no rom reset. ROLAND ALPHA JUNO-1 no rom reset. ROLAND ALPHA JUNO-2 no rom reset. ROLAND AP-700 PWR ON, EXIT REPEATEDLY TO ANALYZER/FILTER SCREEN. CURSOR TO: MENU + ENTER, SYSTEM + ENTER, INIT + ENTER. USE VALUE SELECT ALL THEN EXEC + ENTER TWICE. ROLAND AR SERIES no rom reset. ROLAND AT SERIES HOLD ONE TOUCH PROGRAM + POWER ON. ROLAND AX-1 HOLD WRITE BUTTON + POWER ON (HOLD 30 SECONDS). ROLAND AXIS-1 POWER ON. HOLD FUNCTION; PRESS F#0, C#2, AND D#2 KEYS. ROLAND CA-30 RESETS EVERY TIME TOGGLED OF AND THEN ON. ROLAND CDX1 PRESS UTILITY. CURSOR RIGHT, SELECT INIT AND PRESS ENTER THEN CURSOR TO GLOBAL. PRESS ENTER THREE TIMES. ROLAND CR ( ALL OTHER) no rom reset. ROLAND CR-80 DEL + REPEAT + POWER ON, THEN PRESS ENTER. ROLAND CSQ SERIES no rom reset. ROLAND D-10 HOLD TUNE/FUNCTION AND WRITE WHILE POWERING ON. ROLAND D-110 no rom reset. ROLAND D-20 HOLD TUNE/FUNCTION AND WRITE WHILE POWERING ON. ROLAND D-5 no rom reset. ROLAND D-50 TUNE/FUNCTION AND MIDI DATA INIT: HOLD 0 AND DATA TRANSFER, POWER ON. PATCH + REVERB MUST BE LOADED FROM CARD OR SYSEX FILE. ROLAND D-550 TUNE/FUNCTION AND MIDI DATA INIT: HOLD PATCH BANK 2, PATCH NUMBER6, AND ENTER, POWER ON. PATCH AND REVERD DATA MUST BE LOADED FROM CARD OR SYSEX FILE. ROLAND D-70 HOLD BANK 8 WHILE POWERING ON. PRESS ENTER, THENPRESS WRITE TWICE. ROLAND D2 HOLD WRITE + PRESS SYSTEM. PRESS ENTER TWICE. ROLAND DDR-30 HOLD #1 BUTTON AND POWER ON. ROLAND DEP-3 MEMORY NO UP AND DOWN BUTTONS WHILE POWERING ON. ROLAND DEP-5 MEMORY NO UP AND DOWN BUTTONS WHILE POWERING ON. ROLAND DJ-70 no rom reset. ROLAND DJ-70MKII no rom reset. ROLAND DM SERIES no rom reset. ROLAND DR-202 HOLD MUTE + ROLL AND POWER ON. VALUE DIAL TO SELECT 'ALL', THEN PRESS TAP/ENTER TWICE. ROLAND DR-5 FRET LEFT + FRET RIGHT + POWER ON; 2 X ENTER. ROLAND DR-550 HOLD -1 AND +1 AND POWER ON, THEN PRESS START. ROLAND DR-550MKII HOLD -1 AND +1 AND POWER ON, THEN PRESS START. ROLAND DR-660 UTILITY THEN CURSOR TO SELECT (8) INIT; 2 X ENTER. ROLAND DR-670 HOLD RECORD + STOP/CONT BUTTONS AND POWER ON. PRESS ENTER TWICE. ROLAND DR-770 PRESS UTILITY AND THEN CURSOR RT TO 9.F.RST. VALUE DIAL TO SELECT ALL, AND THEN PRESS ENTER TWICE. ROLAND DS-330 HOLD REVERB + SPLIT AND POWER ON; PRESS YES. ROLAND E-10 HOLD WRITE WHILE TURNING POWER ON. ROLAND E-12 no rom reset. ROLAND E-14US resets at power on. ROLAND E-15 resets at power on. ROLAND E-16 resets at power on. ROLAND E-20 HOLD WRITE + POWER ON. ROLAND E-28US resets at power on. ROLAND E-30 HOLD WRITE + POWER ON. ROLAND E-35 HOLD REC/PUNCH IN + POWER ON. ROLAND E-36 RECORDER + POWER ON. ROLAND E-5 no rom reset. ROLAND E-56 HOLD WRITE + POWER ON. ROLAND E-66 RECORD (IN DISK RECORDER SECTION) + POWER ON. ROLAND E-68US HOLD WRITE + POWER ON. ROLAND E-70 HOLD WRITE + POWER ON. ROLAND E-86 HOLD WRITE + POWER ON. ROLAND E-96 HOLD WRITE + POWER ON. ROLAND E300 PRESS UTILITY. USE BUTTONS BELOW 'PAGE' TO SELECT FACTORY PRESET. PRESS EXECUTE, THEN OK. WHEN RESET COMPLETE POWER OFF, THEN ON. ROLAND E500 PRESS UTILITY. USE BUTTONS BELOW 'PAGE' TO SELECT FACTORY PRESET. PRESS EXECUTE, THEN OK. WHEN RESET COMPLETE POWER OFF, THEN ON. ROLAND E600 PRESS UTILITY. USE PAGE BUTTONS TO SELECT FACTORY PRESET, THEN EXECUTE. ROLAND EF303 HOLD SHIFT AND THEN POWER ON. PRESS WRITE TWICE,THEN POWER OFF AN ON AGAIN. ROLAND EM-10 HOLD WRITE AND POWER ON. ROLAND EM-101 no rom reset. ROLAND EM-15 HOLD THE WRITE BUTTON WHILE TURNING ON THE POWER. ROLAND EM-20 HOLD WRITE AND POWER ON. ROLAND EM-25 HOLD THE WRITE BUTTON WHILE TURNING ON THE POWER. ROLAND EM-30 HOLD WRITE AND POWER ON. ROLAND EM-303 resets at power on. ROLAND EM-305 resets at power on. ROLAND EM-50 HOLD WRITE AND POWER ON. ROLAND EP (ALL OTHER) no rom reset. ROLAND EP-3 resets at power on. ROLAND EP-5 HOLD REC + PLAY, PRESS STRINGS, POWER OFF / ON. ROLAND EP-7 HOLD REC + PLAY, PRESS STRINGS, POWER OFF / ON. ROLAND EP-707 resets at power on. ROLAND EP-75 HOLD REC AND POWER ON. ROLAND EP-7MKII HOLD REC + PLAY, PRESS STRINGS, POWER OFF AND ON. ROLAND EP-85 HOLD REC AND POWER ON. ROLAND EP-9 HOLD REC + PLAY, PRESS CHOIR, POWER OFF AND ON. ROLAND EP-95 HOLD REC BUTTON WHILE POWERING ON. ROLAND FA76 PRESS MENU THEN UP/DOWN TO FACTORY PRESET. PRESSF8 TWICE ( SELECT THEN EXECUTE ) TO RESET. ROLAND FANTOM PRESS MENU THEN UP/DOWN TO FACTORY PRESET. PRESSF8 TWICE ( SELECT THEN EXECUTE ) TO RESET. ROLAND FC-100 no rom reset. ROLAND FC-100MKII HOLD #1 + #2 + #8 AND POWER ON. ROLAND FC-200 HOLD #10 AND POWER ON, THEN PRESS CTL PEDAL. ROLAND FG-10 HOLD CLEAR AND EXIT THEN POWER ON. ROLAND FG-1000 HOLD CLEAR AND EXIT THEN POWER ON. ROLAND FP-1 resets at power on. ROLAND FP-8 PRESS FUNC AND RELEASE HOLD PIANO PRESS FUNC AGAIN. ROLAND FP-9 resets at power on. ROLAND G-600 HOLD WRITE AND POWER ON. ROLAND G-800 HOLD WRITE, THEN POWER ON. ROLAND GC-8 no rom reset. ROLAND GI-10 HOLD PARAMETER + AND -, POWER ON THEN PRESS VALUE +. ROLAND GM-70 POLY MODE: HOLD PLAY, GENERAL EDIT, + IND EDIT THEN POWER ON. MONO MODE: HOLD TUNE, CONTROL ASSIGN, AND DATA TRANSFER THEN POWER ON. ROLAND GP-100 HOLD IN PARAMETER KNOB, POWER ON, PRESS WRITE. ROLAND GP-16 HOLD #6, #7, #8, THEN POWER ON. USE FUNCTION LEFT AND RUGHT TO SELECT "2. ALL FACTORY PRESET"THEN PRESS WRITE 3 TIMES. ROLAND GP-8 no rom reset. ROLAND GR (ALL OTHER) no rom reset. ROLAND GR-09 HOLD PEDAL #2 THEN POWER ON. PRESS VALUE+ THEN PRESS EDIT/PLAY. ROLAND GR-1 HOLD WRITE/COPY THEN POWER ON THEN PRESS YES. ROLAND GR-30 HOLD PEDAL #2, POWER ON. PRESS PATCH + TO SELECT INIT. PRESS EDIT/PLAY, THEN PATCH + AND - SIMULTANEOUSLY. ROLAND GR-33 PRESS SYSTEM THEN PARAMETER, USE VALUE DIAL TO SELECT ALL. PRESS WRITE TWICE. ROLAND GR-50 no rom reset. ROLAND GS-6 no rom reset. ROLAND GT-3 HOLD MOD AND SFX AND POWER ON. PRESS WRITE. ROLAND GT-5 HOLD MOD + FEED BACKER/SLOW GEAR, POWER ON. THEN PRESS WRITE. ROLAND GX-700 PRESS TUNER/UTILITY. USE PARAMETER LEFT AND RIGHT TO SELECT FACT INIT. CURSOR TO LEFT, DIAL SYSTEM, THEN RIGHT AND DIAL P#100. PRESS WRITE THEN TUNER/UTILITY. ROLAND HP (ALL OTHER) resets at power on. ROLAND HP-100 no rom reset. ROLAND HP-300 no rom reset. ROLAND HP-400 no rom reset. ROLAND HS SERIES no rom reset. ROLAND JD-800 PRESS DATA TRANSFER. PAGE UP TO SELECT FACTORY PRESET, PRESS YES. ROLAND JD-990 HOLD EXIT AND PRESS UTILITY. PRESS F6 THEN F5. ROLAND JP-6 no rom reset. ROLAND JP-8 no rom reset. ROLAND JP-8000 HOLD SHIFT, PRESS INIT/BULK. PRESS BUTTON 7, USE UP/DOWN (SELECT FACTORY RESET), PRESS WRITE TO SELECT FACTORY PRESETS. ROLAND JS-30 HOLD RECORD BUTTON (SEQUENCER SECTION), POWER ON. ROLAND JUN0-106 no rom reset. ROLAND JUN0-60 no rom reset. ROLAND JUNO-1 no rom reset. ROLAND JUNO-2 no rom reset. ROLAND JUNO-6 no rom reset. ROLAND JUPITER-6 no rom reset. ROLAND JUPITER-8 no rom reset. ROLAND JV-1000 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE. ROLAND JV-1080 PRESS UTILITY. CURSOR DOWN ONCE THEN RIGHT 3 TIMES TO FACTORY PRESET. PRESS ENTER TWICE, THEN UTILITY. ROLAND JV-2080 PRESS UTILITY. PRESS F6 TWICE TO MENU 3. PRESS F1 THEN F6. IF REQ'D USE VALUE DIAL TO TURN OFF MEM. PROT. AND PRESS F6 TWICE. ROLAND JV-30 PRESS CHORUS + REVERB (ABOVE INIT) TOGETHER THEN PRESS VALUE UP. ROLAND JV-35 PRESS CONTROL + MASTER TOGETHER. USE PARAMETER UP AND DOWN TO SELECT ALL. PRESS VALUE UP. ROLAND JV-50 PRESS CONTROL + MASTER TOGETHER. USE PARAMETER UP AND DOWN TO SELECT ALL. PRESS VALUE UP. ROLAND JV-80 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE. ROLAND JV-880 PRESS UTILITY, USE DATA DIAL TO SELECT FACTORY PRESET. PRESS ENTER TWICE. ROLAND JV-90 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE. ROLAND JW-50 PRESS TUNE/FUNCTION. PRESS F5 THEN F4 THEN F3 THEN F4. ROLAND JX-1 HOLD WRITE AND FLUTE THEN POWER ON. ROLAND JX-10 no rom reset. ROLAND JX-3P no rom reset. ROLAND JX-8P no rom reset. ROLAND KR-100 resets at power on. ROLAND KR-3000 HOLD FROM AND TO BUTTONS, THEN PRESS WRITE. ROLAND KR-33 resets at power on. ROLAND KR-350 HOLD LOAD AND SAVE, THEN PRESS WRITE. ROLAND KR-3500 HOLD LOAD AND SAVE, THEN PRESS WRITE. ROLAND KR-370 resets at power on. ROLAND KR-4500 HOLD LOAD AND SAVE, THEN PRESS WRITE. ROLAND KR-4700 HOLD LOAD AND EDIT, THEN PRESS SAVE. ROLAND KR-500 HOLD FROM AND TO, THEN PRESS WRITE. ROLAND KR-5000 HOLD LOAD AND EDIT, THEN PRESS SAVE. ROLAND KR-55 HOLD MIDI FUNCTION AND PRESS CARDS (5 SECONDS). ROLAND KR-5500 HOLD LOAD AND SAVE, THEN PRESS WRITE. ROLAND KR-575 PRESS FUNCTION; PAGE TO 'FACTORY RESET'. TOUCH EXECUTE, THEN OK. ROLAND KR-577 PRESS UTILITY; USE BUTTONS BELOW PAGE TO SELECT 'FACTORY PRESET'. PRESS EXECUTE, THEN OK. ROLAND KR-650 HOLD LOAD AND SAVE, THEN PRESS WRITE. ROLAND KR-770 HOLD PART VOLUME ACCOMP, PRESS TRACK 2 + 4 BUTTONS SIMULTANEOUSLY. USE PART VOLUME ACCOMP REPEATEDLY TO GET FACTORY SET-UP LOAD. WHEN DONE PWR OFF/ON. ROLAND KR-977 PRESS FUNCTION; USE PAGE BUTTONS TO 'FACTORY RESET'. TOUCH EXECUTE, THEN OK. ROLAND LVC-1N HOLD ENTER BUTTON THEN POWER ON. ROLAND M-760 HOLD EDIT, PRESS WRITE. PARAMETER UP/DOWN TO SELECT ALL + PRESS WRITE. ON COMPLETION PRESS EDIT TO RETURN TO PLAY. ROLAND M-DC1 HOLD F3 AND THEN POWER ON. ROLAND M-GS64 HOLD F3 AND THEN POWER ON. CONTRIBUTED-: HOLD SELECT AND PRESS F4, PRESSF3 AND THEN PRESS ENTER. ROLAND M-OC1 HOLD F3 AND THEN POWER ON. ROLAND M-SE1 HOLD F3 AND THEN POWER ON. ROLAND M-VS1 HOLD F3 AND THEN POWER ON. ROLAND MBD1 HOLD F3 AND THEN POWER ON. ROLAND MC-303 HOLD SHIFT AND THEN POWER ON, THEN PRESS ENTER. ROLAND MC-307 PRESS SYSTEM, THEN F2 (UTIL). CURSOR DN TO FACTORY RESET. PRESS F1 AND THEN F4. ROLAND MC-50 no rom reset. ROLAND MC-505 HOLD SHIFT BUTTON AND POWER ON. PRESS ENTER. ROLAND MC-50MKII no rom reset. ROLAND MC-80 no rom reset. ROLAND MC-80EX no rom reset. ROLAND MDC-1 HOLD F3 AND POWER ON. ROLAND ME-10 HOLD BANK DOWN PEDAL, THEN PRESS WRITE. ROLAND ME-30 HOLD PARAMETER RIGHT AND VALUE WHILE POWERING ON. PRESS WRITE/COPY. ROLAND ME-33 HOLD EZ TONE AND AMP/EFFECT RIGHT WHILE POWERING ON. THEN PRESS WRITE. ROLAND ME-5 HOLD PEDALS 1 AND 2, POWER ON; PRESS WRITE IMMEDIATELY. ROLAND ME-6 HOLD LEFT + DOWN AND POWER ON; THEN PRESS WRITE. ROLAND ME-6B HOLD LEFT + DOWN AND POWER ON; THEN PRESS WRITE. ROLAND ME-8 HOLD LEFT + DOWN AND POWER ON; PRESS WRITE/COPY. ROLAND ME-8B HOLD PARAMETER LEFT + DOWN BUTTONS, THEN PRESS WRITE/COPY. ROLAND ME-X HOLD PARAMETER LEFT + DOWN AND POWER ON, THEN PRESS WRITE. ROLAND MGS-64 HOLD F3 AND POWER ON. ROLAND MK-60 no rom reset. ROLAND MK-80 HOLD WRITE, PRESS EDIT. HOLD LEFT AND RIGHT CURSOR BUTTONS AND PRESS UP. ROLAND MKB SERIES no rom reset. ROLAND MKS-50 POLY MODE: HOLD NUMBER BUTTONS 4 AND 8 AND POWER ON. ROLAND MKS-50 MONO MODE: HOLD NUMBER BUTTONS 3 AND 7 AND POWER ON. ROLAND MMP-2 PRESS SYSTEM UNTIL LIGHTS ORANGE. USE PAGE LEFT/RIGHT BUTTONS TO SELECT INITIALIZE. USE LEFT VALUE TO SELECT ALL; PRESS ENTER TWICE. ROLAND MP SERIES no rom reset. ROLAND MS-1 no rom reset. ROLAND MSE-1 HOLD F3 AND POWER ON. ROLAND MSQ-100 no rom reset. ROLAND MSQ-700 no rom reset. ROLAND MT-100 HOLD STOP, PRESS DELETE. AFTER THE DISPLAY FLASHES "ALL CLEAR" PRESS EXECUTE. ROLAND MT-120 HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. PRESS FWD REPEATEDLY UNTIL READS T13. PRESS PLAY THEN RECORD, THEN POWER OFF/ON. ROLAND MT-120S HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. PRESS FWD REPEATEDLY UNTIL READS T13. PRESS PLAY THEN RECORD, THEN POWER OFF/ON. ROLAND MT-200 HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. USE DIAL TO SELECT T-15 ON DISPLAY. PRESS PLAY THEN RECORD, THEN POWER OFF/ON. ROLAND MT-300 PRESS MENU, DIAL TO FACTORY PRESET. PRESS ENTER TWICE. ROLAND MT-32 HOLD MASTER VOLUME, PRESS RHYTHM PART, PRESS PART 1. ROLAND MT-80 resets at power on. ROLAND MV-30 no rom reset. ROLAND MVS-1 HOLD F3 AND POWER ON. ROLAND OCTAPAD HOLD MIDI CH AND NOTE NUMBER, POWER ON. POWER OFF, THEN POWER ON AGAIN. ROLAND OCTAPAD II HOLD BOTH VALUE BUTTONS, POWER ON. ROLAND P-330 no rom reset. ROLAND P-55 HOLD BOTH INSTRUMENT BUTTONS, POWER ON, THEN PRESS PARAM 1. ROLAND PAD-8 HOLD MIDI CH AND NOTE NUMBER, POWER ON. POWER OFF, THEN POWER ON. ROLAND PAD-80 HOLD BOTH VALUE BUTTONS, POWER ON. ROLAND PC-150 HOLD COMMAND (LEFT), POWER ON. ROLAND PC-200 HOLD THE 2 BUTTONS UNDER "STANDARD", POWER ON. ROLAND PIANO PLUS (ALL) no rom reset. ROLAND PK-5 HOLD OCT/PARAM AND POWER ON. ROLAND PK-7 no rom reset. ROLAND PLANET-P no rom reset. ROLAND PLANET-S no rom reset. ROLAND PM-16 no rom reset. ROLAND PMA-5 HOLD VALUE, POWER ON. TOUCH 2 CAL. POINTS TOP RIGHT + BOTTOM LEFT OF DISPLAY W/ TOUCH PEN. DISPLAYS COMPLETED THEN INITIALIZE, TOUCH EXEC. ROLAND PRO-E HOLD WRITE, POWER ON. ROLAND R-5 HOLD PAGE + SELECT AND POWER ON. PRESS ENTER TWICE AT PROMPTS. ROLAND R-70 HOLD MIDI + ASSIGN AND POWER ON. PRESS YES TWICE AT PROMPTS. ROLAND R-8 HOLD CURSOR PAGE AND PARAM SELECT THEN POWER ON.PRESS ENTER TWICE. ROLAND R-880 no rom reset. ROLAND R-8M HOLD CURSOR RIGHT AND ENTER, POWER ON. PRESS ENTER TWICE AT PROMPTS. ROLAND RA-50 HOLD WRITE THEN POWER ON. ROLAND RA-90 HOLD WRITE THEN POWER ON. ROLAND RA-95 HOLD REC, POWER ON. ROLAND RD-150 HOLD THE PLAY AND REC BUTTONS WHILE POWERING ON. ROLAND RSP-550 POWER ON WHILE HOLDING PROG PAGE UP AND DOWN, THEN PRESS WRITE. ROLAND SB-55 POWER ON WHILE HOLDING CLEAR BUTTON. ROLAND SC-155 POWER IN STANDBY MODE. HOLD BOTH INSTRUMENT BUTTONS, PRESS POWER ON AND THEN PRESS ALL. ROLAND SC-33 HOLD SPLIT AND REVERB WHILE POWERING ON, THEN PRESS YES. ROLAND SC-50 HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL. ROLAND SC-55 HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL. ROLAND SC-55MKII HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL. ROLAND SDD-320 no rom reset. ROLAND SH-101 no rom reset. ROLAND SH-2000 no rom reset. ROLAND SN700 no rom reset. ROLAND SP700 no rom reset. ROLAND SPD-11 HOLD ALL/ENTER WHILE POWERING ON. PRESS ALL/ENTER AGAIN. ROLAND SPD-8 HOLD EDIT BUTTON WHILE POWERING ON. ROLAND SRV-1000 no rom reset. ROLAND TB-303 no rom reset. ROLAND TD-10 HOLD SETUP AND EXIT KEYS AND TURN POWER ON, THENPRESS F4. ROLAND TD-7 PRESS SYSTEM. CURSOR TO 'INT' AND PRESS ENTER. CURSOR TO 'HIHAT' THEN DATA DIAL TO SELECT 'ALL'. PRESS ENTER TWICE. ROLAND TD-8 V CUSTOM PRESS SETUP THEN [F3 (MENU)]. PRESS INC/+, ROTATE THE VALUE DIAL, OR PRESS CURSOR TO MOVE THE CURSOR TO "RESET". ROLAND TR-505 HOLD PATTERN GROUP A AND MODE AND POWER ON. ROLAND TR-626 HOLD TRACK #1 AND MODE AND POWER ON. ROLAND TR-707 HOLD TRACK WRITE AND PATTERN 1 AND POWER ON. ROLAND TR-727 HOLD TRACK WRITE AND PATTERN 1 AND POWER ON. ROLAND TR-808 no rom reset. ROLAND TR-909 HOLD TRACK #1 AND PATTERN #1 AND POWER ON. ROLAND U-110 HOLD THE EDIT AND PART BUTTONS AND POWER ON. ROLAND U-20 no rom reset. ROLAND U-220 no rom reset. ROLAND VP-70 HOLD MIDI, PLAY, AND VOICE EXP AND POWER ON. ROLAND VS-1680 no rom reset. ROLAND VS-1680EX no rom reset. ROLAND VS-1824 no rom reset. ROLAND VS-1824CD no rom reset. ROLAND VS-1880 no rom reset. ROLAND VS-2480 no rom reset. ROLAND VS-2480CD no rom reset. ROLAND VS-840 no rom reset. ROLAND VS-840EX no rom reset. ROLAND VS-840GX no rom reset. ROLAND VS-880 no rom reset. ROLAND VS-880EX no rom reset. ROLAND VS-890 no rom reset. ROLAND VT-1 HOLD PRESET/USER BUTTON AND POWER ON. ROLAND W-30 no rom reset. ROLAND W-50 PRESS CONTROL AND MASTER BUTTONS SIMULTANEOUSLY.USE PARAMETER UP AND DOWN BUTTONS TO SELECT ALL. PRESS VALUE UP BUTTON. ROLAND XP-50 PRESS DISK UTIL, SELECT SOUND, THEN PROTECT, SETMEM PROTECT OFF. EXIT, SELECT PRESET AND PRESS ENTER. (REMEMBER TO SET MEM PROTECT BACK ON ). ROLAND XV-5050 PRESS UTILITY AND CURSOR LEFT BUTTONS. VALUE DIAL TO SELECT FACTORY RESET AND PRESS ENTER TWICE. ROLAND XV-5080 PRESS SYSTEM/UTILITY SO LIGHT BLINKING. PRESS F6 AND THEN F5. PRESS F6 (EXECUTE) AGAIN. ROLAND XV-88 PRESS UTILITY, CURSOR DOWN TO UTIL PAGE 2. PRESS4 (BASS), PRESS ENTER TWICE.

15.08.2011, 08:14	#2
Romastudio Пользователь Регистрация: 14.10.2010 Сообщений: 49 Поблагодарили: 14 Вес репутации: 0 Репутация: 10	reset korg How to Reset your KORG Keyboard or Processor 01/W Series Initialization: Hold Reset and Compare while turning it on. Preload: Global screen 7 Press G then E ROM Check: Hold Reset while turning it on. 03R/W Initialization: Hold Edit and 1 while turning it on. Preload: Global screen 5D, then select “OK”. ROM Check: Hold +1 and -1 while turning it on. 05R/W Initialization: Hold Edit and 1 while turning it on. Preload: Global Screen 5A, then select “OK”. ROM Check: Hold Edit and Global/Multi while turning it on. 168RC Initialization: Hold leftmost Knob under screen and Up and Down while turning it on. Preload: Factory data must be transmitted and returned via SysEx dump. ROM Check: Given on power up. A1 Initialization: Hold Write and –1 while turning it on. Preload: Card Load (SPC0A1) ROM Check: Hold Write while turning it on. A2/A3 Initialization: Hold Chain/Effect and B while turning it on. Preload: Hold Up and Down arrows while turning it on. Press ROM Check: Hold Utility, Up and A while turning the unit on. Press F. Set M/R to M/S and D/R to D/S. Hold Utility and F. A4 Initialization: Battery Removal Preload: Hold Bank Up and Write while turning it on. PL appears, press write again. ROM Check: N/A A5 Initialization: Battery Removal Preload: Hold Mode Footswitch and Write while turning it on. Press Footswtich 1, F is dispayed on screen. ROM Check: N/A AX1000G Initialization: Battery Removal Preload: Hold Bank footswitch and Exit button while turning it on. Press Write button to load the factory programs. ROM Check: N/A AX100G Initialization: Battery Removal Preload: Hold FX Select EXIT button while turning it on. Press write button. ROM Check: N/A AX1500G Initialization: Battery Removal Preload: 1. Hold down Bank footswitch EXIT button while turning it on. Then press Write button. ROM Check: N/A AX1G/B Initialization: Battery Removal Preload: Hold down the left arrow key and the "+ while powering on. Then press the "+" button again. ROM Check: N/A AX300G/B Initialization: Battery Removal Preload: Hold Param/Value and Compare/Write while turning it on. Then Compare/Write once again. ROM Check: N/A C-Series Initialization: Hold MIDI/Transpose and Split buttons while turning it on. Preload: Disk Load C900 (CFD01P) Ci86/9600 (CID00PE ) ROM Check: N/A CX-3 Initialization: Hold Program 2 and 7 while turning it on. Preload: Hold Program 2 and 7 while turning it on. ROM Check: N/A D Series Initialization: System, Disk Utility, Initialize Execute Preload: Backup CDs ROM Check: Given on power up. G3 Initialization: Battery Removal Preload: Hold Bank and Write while turning it on. Release both and then press Write again. ROM Check: N/A i1/i2/i3 Initialization: Hold Edit/Style and Arrange/Play while turning it on. Preload: Disk Load (IFD01P for i3 and i2, IFD02P for i1) ROM Check: Hold Enter and 7 while turning it on. I30 Initialization: Hold Arr.Play and Global while turning it on. Preload: Disk Load (I30FD00P) ROM Check: Given on power up. i5S/M Initialization: Hold Arr.Play and Global while turning it on. Preload: Disk Load (IFD00P) ROM Check: Hold Global while turning it on. iS35/40/50/B i40M Initialization: Hold Arr.Play and Global while turning it on. Preload: Disk Load (IFDD1006 except for iS40 and i40M which is FDD1007) ROM Check: Hold Disk/Global while turning it on. iX300 Initialization: Hold Arr.Play and Global while turning it on. Preload: Disk Load (IXD00P) ROM Check: Hold Disk/Global while turning it on. KAOSS Pad Initialization: Hold 3, FX and HOLD buttons while turning it on. L appears in screen. Then press 1,3,5,1,3,5. Preload: N/A ROM Check: N/A KARMA Initialization: Hold Enter and 0 while turning it on Preload: Disk Load (KMFD00P) ROM Check: Given on power up. M1 Initialization: Hold Int, Card and Combi while turning it on. Preload: Card Load (MPC00P) ROM Check: Hold INT while turning it on. M1R/M1REX Initialization: Hold Int, Combi and Prog while turning it on. Preload: Card Load (MPC00P, MPC0EX for EX model) ROM Check: Hold INT while turning it on. M3R Initialization: Hold Edit and No while turning it on. Preload: Global screen 5D “OK”, then select "O.K." ROM Check: Hold Edit and Global while turning it on. MS2000/2000R Initialization: Hold Mod Sequencer On/Off and 3 while turning it on. Preload: Global screen 2D, then select "OK". ROM Check: Hold Mod Sequencer On/Off and 5 while turning it on. N1/N5/EX Initialization: Test Mode - Hold Enter and 7 while turning it on, then Page> to skip to "Ready to Boot", press Enter. Preload: Press Utility, select "Factory Reset" then press Enter. ROM Check: Hold 10s hold and Enter while turning it on. N1R Initialization: Test Mode - Hold Global and Dec- while turning it on, Page> skips to "Ready to Boot", press Enter. Preload: Press Global, Page > to Init. Select "Factory Preload" then press Enter. ROM Check: Hold Edit/Enter and Global while turning it on. N364/N264 Initialization: Hold Enter and 7 while turning it on. Preload: Disk Load (NSD3) ROM Check: Hold Enter and 7 while turning it on. NX/NS5R Initialization: Hold Param. > and < while turning it on. Preload: Enter button, then select Utility, Preset, Factory Preset, Yes. ROM Check: Hold Param < and> while turning it on. PA80/60 Initialization: N/A Preload: Disk Load (6 Disk set available from korgpa.com) ROM Check: Given on power up. Prophecy Initialization: Battery Removal Preload: Global screen 19, press Enter. ROM Check: Hold Enter and Exit while turning it on. PX1 Initialization: Battery Removal Preload: Metronome and Enter buttons while powering on. Then press the "+" button. ROM Check: N/A PX2 Initialization: Battery Removal Preload: Rhythm and Enter buttons while powering on. Then press the "+" button. ROM Check: N/A PX3/PX3B Initialization: Battery Removal Preload: PX3: Rhythm/Aux and "+" button while powering on. Then press the Bypass/Tune button. PX3B: HBB and "+" button while powering on. Then press Bypass/Tune. ROM Check: N/A PX4/PX4B Initialization: Battery Removal Preload: PX4: Rhythm and UP arrow buttons while powering on. Then press Enter/Rec. PX4B: Rhythm and Up arrow buttons while powering up. Then press press Enter/Rec. ROM Check: N/A S3 Initialization: Hold Stop and S1 while turning it on. Preload: Hold Stop and S1 while turning it on. ROM Check: Hold Stop and S4 while turning it on. SG Rack Initialization: Edit and Yes while turning it on. Preload: Global screen 7, then select "O.K". ROM Check: Hold Edit and FX On/Off while turning it on. SGPROX Initialization: Hold Program and Piano 8 while turning it on. Preload: Program Edit mode screen 14 (Each program!) ROM Check: Hold Program and Piano 7 while turning it on. SP500 Initialization: Hold Function and Mixer while turning it on. Preload: Function screen 7. ROM Check: Hold Function and Mixer while turning it on. T Series Initialization: Hold Fine and Prog A while turning it on. Preload: Disk Load (TSD00PII) ROM Check: Hold Fine and Program A while turning it on (Will initialize… back up!) Trinity Series Initialization: Hold Enter and 0 while turning it on Preload: Disk Load (TFD00P and TFD01P) ROM Check: Given on power up. Triton Classic/ST Initialization: Hold Enter and 0 while turning it on Preload: Disk Load (TNFD00P and TNFD01P for Classic, Hard Drive contains preload for Studio) ROM Check: Given on power up. Triton LE Initialization: Hold Enter and 0 while turning it on Preload: Global mode, F8, Select "Preload" ROM Check: Given on power up. Triton Rack Initialization: Hold Enter and 0 while turning it on Preload: Disk Load (TNRFD00P and TNRFD01P) ROM Check: Given on power up. TRR Initialization: Hold A4 and Edit while turning it on. Preload: Global screen 10, then select "OK". ROM Check: Hold Enter and Yes while turning it on. WS/WSEX/AD Initialization: Power on, wait for "Wavestation" to flash then Cursor down and 4. Enter Init screen from there. Preload: Card Load (WPC00PI, II and III) ROM Check: Power on, wait for "Wavestation" to flash then Cursor down and 4. WSSR Initialization: Hold Down Cursor, Bank, Edit and Yes while on. Enter Init screen from there. Preload: Card Load (WPC00PI, II and III) ROM Check: Hold Down Cursor, Bank Edit and Yes while on. X2/X3/X3R Initialization: Hold Page Down and 0 while turning it on Preload: Disk Load (XSD00P) ROM Check: Hold Enter and 7 while turning it on. X5/X5D/DR Initialization: Hold Page + and Page - while turning it on. Preload: Global Screen 5A, then select “OK”. ROM Check: Hold Edit and Global/Multi while turning it on. Z1/Z1EX Initialization: Hold down SW1 and SW2 while turning it on. Preload: Preload screen in global mode. ROM Check: Hold Exit and Enter while turning it on.

15.08.2011, 17:01	#3
Rostyk Местный Регистрация: 04.06.2008 Адрес: Львів(щина) Сообщений: 759 Поблагодарили: 177 Вес репутации: 16 Репутация: 73	Вот более полное "собрание сочинений" (Alesis, ART, BOSS, DIGITECH, Ensoniq, Korg, Kurzweil, OBERHEIM, Peavey, Roland, Yamaha, ZOOM): [Ссылки могут видеть только зарегистрированные пользователи. ]

Здесь присутствуют: 1 (пользователей: 0 , гостей: 1)

Дополнительная информация