reset rolan korg memory setting

[Romastudio]

How to Reset your KORG Keyboard or Processor
01/W Series Initialization: Hold Reset and Compare while turning it on. Preload: Global screen 7 Press G then E ROM Check: Hold Reset while turning it on.
03R/W Initialization: Hold Edit and 1 while turning it on. Preload: Global screen 5D, then select “OK”. ROM Check: Hold +1 and -1 while turning it on.
05R/W Initialization: Hold Edit and 1 while turning it on. Preload: Global Screen 5A, then select “OK”. ROM Check: Hold Edit and Global/Multi while turning it on.
168RC Initialization: Hold leftmost Knob under screen and Up and Down while turning it on. Preload: Factory data must be transmitted and returned via SysEx dump. ROM Check: Given on power up.
A1 Initialization: Hold Write and –1 while turning it on. Preload: Card Load (SPC0A1) ROM Check: Hold Write while turning it on.
A2/A3 Initialization: Hold Chain/Effect and B while turning it on. Preload: Hold Up and Down arrows while turning it on. Press ROM Check: Hold Utility, Up and A while turning the unit on. Press F. Set M/R to M/S and D/R to D/S. Hold Utility and F.
A4 Initialization: Battery Removal Preload: Hold Bank Up and Write while turning it on. PL appears, press write again. ROM Check: N/A
A5 Initialization: Battery Removal Preload: Hold Mode Footswitch and Write while turning it on. Press Footswtich 1, F is dispayed on screen. ROM Check: N/A
AX1000G Initialization: Battery Removal Preload: Hold Bank footswitch and Exit button while turning it on. Press Write button to load the factory programs.
ROM Check: N/A
AX100G Initialization: Battery Removal Preload: Hold FX Select EXIT button while turning it on. Press write button.
ROM Check: N/A
AX1500G Initialization: Battery Removal Preload: 1. Hold down Bank footswitch EXIT button while turning it on. Then press Write button.

ROM Check: N/A
AX1G/B Initialization: Battery Removal Preload: Hold down the left arrow key and the "+ while powering on. Then press the "+" button again. ROM Check: N/A
AX300G/B Initialization: Battery Removal Preload: Hold Param/Value and Compare/Write while turning it on. Then Compare/Write once again. ROM Check: N/A
C-Series Initialization: Hold MIDI/Transpose and Split buttons while turning it on. Preload: Disk Load C900 (CFD01P) Ci86/9600 (CID00PE ) ROM Check: N/A
CX-3 Initialization: Hold Program 2 and 7 while turning it on. Preload: Hold Program 2 and 7 while turning it on. ROM Check: N/A
D Series Initialization: System, Disk Utility, Initialize Execute Preload: Backup CDs ROM Check: Given on power up.
G3 Initialization: Battery Removal Preload: Hold Bank and Write while turning it on. Release both and then press Write again. ROM Check: N/A
i1/i2/i3 Initialization: Hold Edit/Style and Arrange/Play while turning it on. Preload: Disk Load (IFD01P for i3 and i2, IFD02P for i1) ROM Check: Hold Enter and 7 while turning it on.
I30 Initialization: Hold Arr.Play and Global while turning it on. Preload: Disk Load (I30FD00P) ROM Check: Given on power up.
i5S/M Initialization: Hold Arr.Play and Global while turning it on. Preload: Disk Load (IFD00P) ROM Check: Hold Global while turning it on.
iS35/40/50/B i40M Initialization: Hold Arr.Play and Global while turning it on. Preload: Disk Load (IFDD1006 except for iS40 and i40M which is FDD1007) ROM Check: Hold Disk/Global while turning it on.
iX300 Initialization: Hold Arr.Play and Global while turning it on. Preload: Disk Load (IXD00P) ROM Check: Hold Disk/Global while turning it on.
KAOSS Pad Initialization: Hold 3, FX and HOLD buttons while turning it on. L appears in screen. Then press 1,3,5,1,3,5. Preload: N/A ROM Check: N/A
KARMA Initialization: Hold Enter and 0 while turning it on Preload: Disk Load (KMFD00P) ROM Check: Given on power up.
M1 Initialization: Hold Int, Card and Combi while turning it on. Preload: Card Load (MPC00P) ROM Check: Hold INT while turning it on.
M1R/M1REX Initialization: Hold Int, Combi and Prog while turning it on. Preload: Card Load (MPC00P, MPC0EX for EX model) ROM Check: Hold INT while turning it on.
M3R Initialization: Hold Edit and No while turning it on. Preload: Global screen 5D “OK”, then select "O.K." ROM Check: Hold Edit and Global while turning it on.
MS2000/2000R Initialization: Hold Mod Sequencer On/Off and 3 while turning it on. Preload: Global screen 2D, then select "OK". ROM Check: Hold Mod Sequencer On/Off and 5 while turning it on.
N1/N5/EX Initialization: Test Mode - Hold Enter and 7 while turning it on, then Page> to skip to "Ready to Boot", press Enter. Preload: Press Utility, select "Factory Reset" then press Enter. ROM Check: Hold 10s hold and Enter while turning it on.
N1R Initialization: Test Mode - Hold Global and Dec- while turning it on, Page> skips to "Ready to Boot", press Enter. Preload: Press Global, Page > to Init. Select "Factory Preload" then press Enter. ROM Check: Hold Edit/Enter and Global while turning it on.
N364/N264 Initialization: Hold Enter and 7 while turning it on. Preload: Disk Load (NSD3) ROM Check: Hold Enter and 7 while turning it on.
NX/NS5R Initialization: Hold Param. > and < while turning it on. Preload: Enter button, then select Utility, Preset, Factory Preset, Yes. ROM Check: Hold Param < and> while turning it on.
PA80/60 Initialization: N/A Preload: Disk Load (6 Disk set available from korgpa.com) ROM Check: Given on power up.
Prophecy Initialization: Battery Removal Preload: Global screen 19, press Enter. ROM Check: Hold Enter and Exit while turning it on.
PX1 Initialization: Battery Removal Preload: Metronome and Enter buttons while powering on. Then press the "+" button. ROM Check: N/A
PX2 Initialization: Battery Removal Preload: Rhythm and Enter buttons while powering on. Then press the "+" button. ROM Check: N/A
PX3/PX3B Initialization: Battery Removal Preload: PX3: Rhythm/Aux and "+" button while powering on. Then press the Bypass/Tune button. PX3B: HBB and "+" button while powering on. Then press Bypass/Tune. ROM Check: N/A
PX4/PX4B Initialization: Battery Removal Preload: PX4: Rhythm and UP arrow buttons while powering on. Then press Enter/Rec. PX4B: Rhythm and Up arrow buttons while powering up. Then press press Enter/Rec. ROM Check: N/A
S3 Initialization: Hold Stop and S1 while turning it on. Preload: Hold Stop and S1 while turning it on. ROM Check: Hold Stop and S4 while turning it on.
SG Rack Initialization: Edit and Yes while turning it on. Preload: Global screen 7, then select "O.K". ROM Check: Hold Edit and FX On/Off while turning it on.
SGPROX Initialization: Hold Program and Piano 8 while turning it on. Preload: Program Edit mode screen 14 (Each program!) ROM Check: Hold Program and Piano 7 while turning it on.
SP500 Initialization: Hold Function and Mixer while turning it on. Preload: Function screen 7. ROM Check: Hold Function and Mixer while turning it on.
T Series Initialization: Hold Fine and Prog A while turning it on. Preload: Disk Load (TSD00PII) ROM Check: Hold Fine and Program A while turning it on (Will initialize… back up!)
Trinity Series Initialization: Hold Enter and 0 while turning it on Preload: Disk Load (TFD00P and TFD01P) ROM Check: Given on power up.
Triton Classic/ST Initialization: Hold Enter and 0 while turning it on Preload: Disk Load (TNFD00P and TNFD01P for Classic, Hard Drive contains preload for Studio) ROM Check: Given on power up.
Triton LE Initialization: Hold Enter and 0 while turning it on Preload: Global mode, F8, Select "Preload" ROM Check: Given on power up.
Triton Rack Initialization: Hold Enter and 0 while turning it on Preload: Disk Load (TNRFD00P and TNRFD01P) ROM Check: Given on power up.
TRR Initialization: Hold A4 and Edit while turning it on. Preload: Global screen 10, then select "OK". ROM Check: Hold Enter and Yes while turning it on.
WS/WSEX/AD Initialization: Power on, wait for "Wavestation" to flash then Cursor down and 4. Enter Init screen from there. Preload: Card Load (WPC00PI, II and III) ROM Check: Power on, wait for "Wavestation" to flash then Cursor down and 4.
WSSR Initialization: Hold Down Cursor, Bank, Edit and Yes while on. Enter Init screen from there. Preload: Card Load (WPC00PI, II and III) ROM Check: Hold Down Cursor, Bank Edit and Yes while on.
X2/X3/X3R Initialization: Hold Page Down and 0 while turning it on Preload: Disk Load (XSD00P) ROM Check: Hold Enter and 7 while turning it on.
X5/X5D/DR Initialization: Hold Page + and Page - while turning it on. Preload: Global Screen 5A, then select “OK”. ROM Check: Hold Edit and Global/Multi while turning it on.
Z1/Z1EX Initialization: Hold down SW1 and SW2 while turning it on. Preload: Preload screen in global mode. ROM Check: Hold Exit and Enter while turning it on.