Electro voice Dx38 блокировка!

[eltons2121]

''буржуи'' пишут так:

1. Connect DX38 to PC via RS232.
2. Use EV RACE software to backup your user presets (they will be deleted during the reset)
3. Close RACE
4. Open a normal terminal emulator and connect to serial port at 19200bps
5. Type following command and press enter:
/SERVICE/START EEPCLR

The EEPROM will be cleared and you will hear unit click / reset, and then the lock code will be reset to default and service mode will be available from front panel interface.