ADJ Accu Spot 250 Moving Head

[Vadim6706]

для использования в паре Вам нужно одну голову включить в режим "Мастер", другую в режим "Ведомый" и соединить их между собой шнуром XLRпапа-XLRмама. Распайка 1-1-земля(оплетка) 2-2,3-3.
Настройки в самой голове примерно так. На Гибрид инструкцию не нашел.

PLAY MENU -
RUN - Runs the unit as a “master” in a Master/Slave configuration
or as a Stand Alone unit. The unit will run a internal program.
AUDI (Audio) - Runs the unit as a “master” in a Master/Slave
configuration or as a Stand Alone unit in sound active mode.
AUTO - This is a precaution mode in case the DMX signal is lost.
There are four settings to choose from:
• “Off” - This is the default setting, which in case the signal is
lost the fixture will “hold” at the last setting.
• “Run” - The fixture will go into Auto mode and run a pre-programmed
show.
• “Audi” - The fixture will go into Sound Active mode.
AUDI MENU -
ALON (Alone) - Unit runs in stand alone mode, no master/slave.
MAST (Master) - Designates that unit to be master in master/
slave mode