![]() |
Информация о грядущем обновлении форума. |
|
![]() |
#1 |
Местный
Регистрация: 04.06.2008
Адрес: Львів(щина)
Сообщений: 759
Поблагодарили: 177
Вес репутации: 18
Репутация: 73
|
![]()
Поменять батарейку, данные восстановить с помощью глобального меню.
Прекрасный ресурс по сабжу: [Ссылки могут видеть только зарегистрированные пользователи. ] Добавлено через 2 минуты How to Re-Load All Combi/Prog/Kit Factory Settings 1 Press GLOBAL to enter Global Mode. 2 Press "7" to go to Page 7. 3 Select "Load Combi/Prog" (on the top line). 4 Press G or H to execute the "LOAD" command. If you see the message "ERROR: Memory Protected": a. Press "4" to go to Page 4. b. Go to the bottom line ("Protect"). c. Change the settings to show "Prog:OFF" and "Combi:OFF". To turn Prog OFF: Press button "A", "B", "C", or "D". Press VALUE DOWN once. To turn Combi OFF: Press button "E" or "F". Press VALUE DOWN once. d. Go to Step 2 above. 5 The 01 will ask "Are You Sure? Yes No". Notice that "yes" is positioned over buttons E and F. Pushing either E or F means "yes". Notice that "no" is positioned over buttons G and H. Pushing either G or H means "no". 6 Push E or F. The message "Completed" should appear. Добавлено через 2 минуты Или более жестко: If you REALLY want to reset your entire 01 to the way it came from the factory (all settings, not just Prog/Combi/Drums): How to Re-initialize Your 01/W 1 Turn off your 01 2 Press and hold the COMPARE and RESET buttons 3 Turn on your 01 4 Continue holding COMPARE and RESET down. You will see your ROM number and revision date briefly in the bottom-left corner. After that, you will see Combi "A00 Init Combi" in the display. 5 Release the COMPARE and RESET buttons Последний раз редактировалось Rostyk; 25.02.2016 в 14:47 Причина: Добавлено сообщение |
![]() |
![]() |
Эти 2 пользователи поблагодарили Rostyk за это сообщение: | Yulianovich (26.02.2016), Древнейший (26.02.2016) |
![]() |
Здесь присутствуют: 1 (пользователей: 0 , гостей: 1) | |
Опции темы | |
Опции просмотра | |
|
|